SprintDryer

SprintDryer

The SprintDryer can be connected in any way to any type of sprint, with a suitable dryer available for each throughput width of the Sprint series. Of course, you can also use the  SprintDryer together with the DL500 or as a stand-alone-unit with or without an underframe and with or without an inlet or outlet table.
First the wet board is pre-dryed in two squeeze zones. After that the board is completely dried in a hot-air stream. The cross flow fan with integrated heating element generates uniform laminar airflow across the whole working width.

SKU: SprintDryer Category:

Product Description

The board runs automatically through the drying zones of the SprintDryer.
The speed of the roller drive is continuously adjustable in a wide range. Special beard roller assures a uniform transport of the PCB through the machine. The construction of the rollers allows drying boards with different thicknesses.

Features

  • continuous drying
  • Variable transport speed
  • Suitable for different board thickness
  • Low surface temperature
  • Short heating-up time
  • Huge area capacity
  • Table model
  • High grade processing

Technische Daten

SprintDryer 3000

SprintDryer 4500 SprintDryer 6000
Working width:

300 mm

450 mm 600 mm
Board thickness: 0,2 – 4 mm 0,2 – 4 mm 0,2 – 4 mm
Minimum board length : 80 mm 80 mm 80 mm
Speed of passage: 0 – 2.0 m /min 0 – 2.0 m /min 0 – 2.0 m /min
Heating-up time: 15 s 15 s 15 s
Dimensions (LxWxH): 490 x 630 x 750 mm
(1150 mm with underframe)
490 x 700 x 750 mm
(1150 mm with underframe)
490 x 850 x 750 mm
(1150 mm with underframe)
Weight : ca. 40 kg ca. 60 kg ca. 80 kg
Electrical connection: 230 V AC / 50/60 Hz 230 V AC / 50/60 Hz 230 V AC / 50/60 Hz
Power consumption: 3500 W 3500 W 3500 W
Heater: 0 – 62 °C adjustable 0 – 62 °C adjustable 0 – 62 °C adjustable

Technische Änderungen vorbehalten