ccd_atc

CCD automatic tool change

The Bungard CCD/ATC is a high quality Computer Controlled Drilling machine with Automatic Tool Change (ATC). The CCD/2 differs from the CCD/MTC by a half sized working area (325 x 210mm) and an integrated control unit underneath the machine table.

The ATC as well as all other CCDs alows directly processing of Excellon / Sieb&Meyer drill data or HP/GL route data for producing pcbs (drilling, cut-out-routing, isolation milling) or routing/engraving plastics, aluminium and other metals.

The CCD/ATC differs from the CCD/MTC by the automatic 15-slot tool changer. The work space is the same. Compared with the CCD/2 the ATC has a larger work space (325x495mm in contarst to 270x325mm with the CCD/2) and a separate control unit.

The ATC is ideal for big and more complex PCBs with many different drill sizes. 19 inch rack boards can also be processed.

 

SKU: CCD/ATC Category:

Product Description

Technical Data:

Power supply: 110-240 V, 50-60 Hz + vacuum cleaner (1500W)
Range of RPM: 30.000 – 63.000 from 2016: 3.000 – 63.000
Traveling speed: 1 – 9000 mm/min
Software resolution: 0,0001mm (0,1µm) from 2016: 0,01µm
Mechanical resolution: step resolution: Software selectable: 1 mil, ½ mil, ¼ mil (= 6.35 µm) from 2016: 3,175µm
Tool diameter: 0.1mm – 3,175mm (recommended, bigger tool diameter possible)
Position accuracy: 20 ppm (0.002%) over the entire work space:
Maximum position speed per axis: 9000/mm/min (=150 mm/s)
Maximum working speed per axis: 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed
Drill speed: 5/s (= 18.000 holes/h= 300 holes/min)
Required Accessories: Computer
Board fixation: span fixing, clamp fixing, reference pin system, stack processing possible
Option: vacuum fixation

 

CCD/ATC
Weight kg 35
Dimension mm 700x800x300
Work area mm 325x495x38
Tool change 16